Ingersoll-Rand Accessories pour stations de travail


Solutions ergonomiques Modèles disponibles pour un placement au sol ou au banc de montage Vaste gamme de porte-outils et de serrage universel Idéal pour Ingersoll Rand séries QA et QE outils pneumatiques	Visseuses pneumatiques Clés d'angle pneumatiques Accessoires pour outillage Lames et embouts

QTA Ingersoll-Rand Single Arm Workstations for bench top installation - complete with universal clamp

Photo	Type / Modell-No.	Max Nm	kg	mm	mm	mm
	QTA010	10	1.2	380	330	706
	QTA020	20	2.3	508	368	808
	QTA040	40	3.0	635	445	1008
	QTA100	100	3.6	762	445	1008
	QTA150*	150	4.5	1321	559	2000
	*The QTA150 can be easily configured as either a bench-mounted or floor-mounted torque arm, and reconfigured as the job demands.
	Anodized aluminum body on bearing and chrome plated pole Die-cast aluminum spring balancer Standard inline tool holder up to 100 Nm (1) > other toolholders Cable management clips to route air hose or DC tool cable

début de page

QTA Ingersoll-Rand Floor-mounted torque reaction arms- complete with universal tool holders

Photo	Type / Modell-No.	Max Nm	kg	mm	mm	mm
	QTA270	270	10	1524	477	2000
	QTA 475	475	23	2007	590	2000
	Adjustable arm height at column Air cylinders and regulator Cable management clips to route air hose or DC tool cable Safety stop

début de page

Generic clamp style tool holders

Type / Modell-Nr.	Type No.	QTA010	QTA020	QTA040	QTA100
Type / Modell-Nr.	Type No.	max. tool Ø 25-40mm	max. tool-Ø 28-52 mm
Inline	0	ITC010-1C	ITC040-1C	ITC040-1C	ITC100-1C
Right Angle	1	ATC010-1C	ATC040-1C	ATC040-1C	ATC100-1C
Pistol	2	PTC010-1C	PTC040-1C	PTC040-1C	-
Rotating	3	RTC010-1C	RTC040-1C	RTC040-1C	-
1/4" NPT	4	NTC010-1C	-	-	-
0 = Inline > included in scope of delivery. Generic tool holders are available for arms up to 100 Nm (these arms are delivered with an inline tool holder as standard). Flange mounting is recommended for inline tools with torque capacity above 40 Nm. Please note the tool diameter range for generic holders: QTA010: 25 – 40 mm, QTA020 / QTA040 / QTA100: 28 – 52 mm.

début de page
Tool holders for Ingersoll Rand QA and QE product range

Ingersoll Rand Model	Type	Type/ Notes	QTA010	QTA020	QTA040	QTA100	QTA150	QTA270	QTA475
QE4			-	CTC040-K1B	CTC040-K1B	-	-	-	-
QE4		-	CTC040-K1P	CTC040-K1P	CTC040-K1P	-	-	-	-
QE6		-	-	CTC040-K2B	CTC040-K2B	CTC100-K2B	-	-	-
QE8		with GEM 120-K48	-	-	-	CTC100-K2B	CTC150-K2B	-	-
		with integrated flange	-	-	-	CTC100-K3B	CTC150-K3B	CTC270-K3B	-
		230 Nm	-	-	-	-	-	CTC270-K4B	-
		400 Nm	-	-	-	-	-	-	CTC475-K5B
QA4		-	-	CTC040-K6B	CTC040-K6B	CTC100-K6B	-	-	-
		< 28 Nm & QA6		CTC040-K1B	CTC040-K1B	CTC100-K1B	-	-	-
		46 Nm	-	-	-	CTC100-K2B	-	-	-
QA8		< 151 Nm	-	-	CTC040-K1B	CTC100-K1B	CTC150-K2B	-	-
		< 56 Nm	-		CTC040-K1B	CTC100-K1B	CTC150-K2B	-	-
		>150 Nm	-	-	-	CTC100-K2B	CTC150-K3B	CTC270-K3B	-
		> 55 Nm	-	-	-	CTC100-K2B	CTC150-K3B	CTC270-K3B	-
		Note: Every Ingersoll Rand QE- or QA-specific tool holder listed in the table above accepts both angle and inline tools but requires an integrated flanged gear case or bolt-on mounting flange to attach the tool holder to the tool. If your tool came with mounting style P (with letter "P" in the model number) order Part No. 15E4-K48 for any Ingersoll Rand-specific tool holder that ends with "1B" — Order Part No. GEM120-K48 for any Ingersoll Rand-specific tool holder that ends with "2B" — Order Part No. QA4-K48 for any Ingersoll Randspecific tool holder that ends with "6B".

début de page

website design & development by emazing international :: last updated 30.12.11