DEUTSCH - ENGLISH - FRANÇAISSpacer12
Spacer12
Peter Hold Ltd - Industrial Air Solutions, hoists, tools, compressores and accessories Peter Hold Ltd - Industrial Air Solutions, hoists, tools, compressores and accessories

Ingersoll-Rand Certified Service
Pneumatic Compact Torque Wrenches - Inline Air Torque Wrenches

Pneumatic Compact Torque Wrenches - Inline Air Torque Wrenches
  • the new generation of continuously rotating pneumatic torque wrenches - with no hammer mechanism
  • extremely compact design
  • save and easy mode of operation
  • secure and precise operation
  • easy change of direction - left to right hand operation
  • optimum transmission of high torque's
  • heavy duty gear box - proved design
  • low noise level
  • replaces tube extensions and other inappropriate tools
  • Model CLV ideal as inline wrench or for remote control operation
  • ideal for operation in hazardous areasEx Atex

Lightweight, fast pneumatic torque wrenches type DL
Photo Type
Model-No.		 Torque range
Nm *		 Square
Drive
 Ø mm
 Height
mm 		Idle
speed
1/min 		Weight
**
kg
D1 D2 D3
Lightweight, fast pneumatic torque wrenches type DL DL 475 150-475 3/4" 60 69 222 228 300 3.7
DL 750 275-750 3/4" 60 69 222 241 170 4.0
DL 1000 400-1100 3/4" 72 83 241 247 170 5.2
DL 1900 700-1900 1" 76 83 241 292 69 7.2
DL 2400 950-2450 1" 76 83 241 292 53 7.2
DL 4000 1900-4000 1" 78 86 264 398 55 11.3
Please contact us for further models available upon request
back to top

Compact Pneumatic Torque Wrench Type CLD/L
Photo Type
Model-No.		 Torque range
Nm *		 Square
Drive
 Ø mm
 Height
mm 		Idle
speed
1/min 		Weight
**
kg
D1 D2 D3
Compact Pneumatic Torque Wrench Type CLD/LCompact Pneumatic Torque Wrench Type CLD/L

 CLD/L1
 75-225 1/2" 41 88 85 255 60 6.3
CLD/L1
 75-225 3/4" 41 88 85 255 60 6.3
CLD/L2 135-390 3/4" 41 88 85 255 34 6.3
CLD/L3 165-485 3/4" 41 88 85 255 27 6.3
CLD/L4 305-895 3/4" 41 88 85 275 19 7.0
CLD/L5 365-1080 3/4" 41 88 85 275 13 7.0
CLD/L6 365-1080 3/4" 41 88 85 275 9 7.0
CLD/L6 365-1080 1" 54 88 85 300 9 7.3
CLD/L7 645-1900 1" 54 88 85 300 7 7.3

back to top

Assembly Pneumatic Torque Wrench Type with 360° swivel of handle/motor unit for ideal operator comfort
Photo Type
Model-No.		 Torque range
Nm *		 Square
Drive
 Ø mm
 Height
mm 		Idle
speed
1/min 		Weight
**
kg
D1 D2 D3
Assembly Pneumatic Torque Wrench
Assembly Pneumatic Torque Wrench
CLD 55
 165-485 3/4" 41 85 88 280 48 7.0
CLD 85 305-895 3/4" 41 85 88 300 25 8.5
CLD 85 305-895 1" 54 85 88 300 25 8.5
CLD 105 365-1080 1" 54 85 88 300 15 8.5
CLD 125 450-1315 1" 54 85 88 300 12 8.5
CLD 155 590-1730 1" 54 85 88 300 10 8.5
CLD 225 910-2670 1" 54 85 88 300 8 9.0
CLD 280 1180-3460 1" 54 85 88 300 4 12.0
CLD 380 1490-4380 1 1/2" 72 98 98 320 4 12.0
CLD 580 2080-6115 1 1/2" 72 123 123 350 2.5 16.0
CLD 780 3265-9595 1 1/2" 72 148 148 350 1 19.0
CLD 980
3810-11195 1 1/2" 91 173 173 370 0.5 25.0
back to top

Compact Pneumatic Torque Wrenches Type CLS-2 - with 2 speed gearbox
Change of speed through mechanical gearbox, from quick run down mode to power mode. Torque range from 120 Nm up to 48'600 Nm can be achieved. Rigid connection of motor body and gear box. The position of the torque wrench can be adjusted by 10-15 degree steps by positioning the torque reaction arm on the spline drive of the drive unit. The ideal torque wrench when high output and flexibility is required.
Photo Type /
Model-No.		 Torque
Nm *		 Square
drive 		Ø mm
 Height
mm 		Idle
speed
1/min
 **
Weight kg
2 Gear 1 Gear D1 D2 D3 2
Gear		 1
Gear
Compact Pneumatic Torque Wrenches Type CLS-2
Compact Pneumatic Torque Wrenches Type CLS-2 - Dimensions 		CLS 2/100
 120-355 380-1125 3/4" 41 85 88 330 36 12 7.0
CLS 2/150
 170-505 550-1615 1" 54 85 88 330 21 7 7.5
CLS 2/300 385-1130 1225-3595 1" 54 85 88 360 15 5 9.0
CLS 2/400 540-1585 1720-5055 1 1/2" 72 98 98 380 9 3 11.0
CLS 2/600 840-2470 2675-7865 1 1/2" 72 123 123 410 6 2 15.0
CLS 2/800 1010-2965 3210-9435 1 1/2" 72 148 148 410 5 1.5 20.0
CLS 2/1000 1175-3455 3745-11010 1 1/2" 91 173 173 430 4 1 24.0
CLS 2/1700 1600-4800 5800-17000 2 1/2" SW
120 		275 275 570 1 0.5 60.0
CLS 2/3400 3300-9700 11500-34000 2 1/2" SW
120 		275 275 570 0.8 0.4 60.0
CLS 2/4800 4700-13900 16000-48600 2 1/2" SW
120 		275 275 570 0.6 0.3 60.0
back to top

Inline Torque Wrench Type CLV - Ideal design for remote control systems or for applications requiring multiple units
For serial fully automated or partially automated assembly work. Low noise level due to integrated and sophisticated insulation system.
Photo Type
Model-No.		 Torque range
Nm *		 Square
Drive
 Ø mm
 Height
mm 		Idle
speed
1/min 		Weight
**
kg
D1 D2 D3
Inline Torque Wrench Type CLV

 CLV 15
 60 - 220 3/4" 41 85 155 296 60 5.8
CLV 25 95 - 280 3/4" 41 85 155 296 38 5.8
CLV 35 135 - 390 3/4" 41 85 155 296 34 6.2
CLV 45 165 - 485 3/4" 41 85 155 318 27 6.2
CLV 75 305 - 895 3/4" 41 85 155 318 19 6.8
CLV 95 365 - 895 3/4" 41 85 155 318 13 6.8
CLV 135 495 - 1450 1" 54 85 155 320 9 6.8
CLV 175 645 - 1900 1" 54 85 155 340 7 6.8
CLV 255 910 - 2670 1" 54 85 155 372 6 7.4
CLV 315 1180 - 3460 1" 54 85 155 372 4 7.4
FBL-DUO FBL

Remote control valve for CLV-units, the perfect solution for remote controlled operation of bolt connections. Available as hand- or foot-control valve.
FBL-DUO

Remote control valve for the simultaneous operation of 2 x CLV torque wrenches, ideal for controlled and synchronised tightening or loosening of bolt connections.
FBL-QUATTRO
Remote control valve for the simultaneous operation of 4 x CLV torque wrenches, ideal for controlled and synchronised tightening or loosening of bolt connections.
Remote control valve for CLV-units, the perfect solution for remote controlled operation of bolt connections. Available as hand- or foot-control valve.Remote control valve for the simultaneous operation of 4 x CLV torque wrenches, ideal for controlled and synchronised tightening or loosening of bolt connections.
back to top

Technical information in regards to the operation of pneumatic torque wrenches type DL, CLD, CLS, CLV
Photo Description
pneumatic torque wrenches

The torque of the pneumatic torque wrench is regulated by the regulator. An air pressure of 2 - 7 bar with an air volume of approx. 10-15 litres/second ensures optimal operating conditions.

The torque accuracy depends on the stability of the air supply!
Kennlinien-Datenblatt
* The torque is controlled by the air pressure and controlled by the air regulator of the air maintenance unit. Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque.

** Weight without torque reaction arm
back to top

Accessories for pneumatic Torque Wrenches Type DL, CLD, CLS, CLV
Photo Type
Model-No.		 Description
Air Maintenance unit complete 20350

Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle.

In order to maintain maximum performance and lifetime of the pneumatic torque wrench the compressed air needs to be lubricated.
back to top
spacer
© 2002 - 2010 Peter Hold Ltd - all rights reserved
Disclaimer - Links - Site map - Contact

website design & development by emazing international :: last update 28.8.10