Benefits
of Ownership
• Classic Thermal Mass™ Performance
Most installations operate with varying degrees of
compressed air usage. When there is no or littledemand for dry
air, the TMS simply shuts down tosave energy. The main exchanger
contains a liquidThermal Mass™, which stores a vast amount
of coldenergy that lays dormant until the load demand increases
to a point where the unit automatically
restarts providing consistent dewpoints and
temperatures.
• Variable Dewpoint Settings
An accurate start/stop control system maintainsthe dewpoint
and can be easily adjusted up to amaximum of 10°C thereby
allowing the dryer to run with even greater efficiency.
• Machines Built to Last
The reliability of TMS dryers is legendary even
when operating within the harshest of environments.
This can only be achieved using the latest refrigeration technology
constructed from heavy duty materials to the highest quality
standards.
• Lowest Running Costs of Any
Refrigeration Dryer
The patented designs of our heat exchanger gives
an extremely low pressure drop. All heat exchangers are made
from smooth bore corrosion free copper. Typically, the TMS dryer
has a pressure drop across the dryer of less than 0.2 bar! Remember,
for each additional 0.14 bar pressure
the air compressor has to provide, the running costs
of the air compressor electric motor will increase by at least
1% (ignoring additional wear and tear). Therefore by keeping
pressure drop to a minimum, tremendous energy savings can be
obtained. |
•
Units That Are Easily Serviced
Simple maintenance programs ensure that the
units will keep operating at peak efficiency for years
to come. Also, through careful design fouling of the
internal heat exchanger surfaces is negligible
thereby eliminating future requirements for cleaning
or additional filtration. In addition, expensive
pressure vessel inspections are not required.
• Efficient and Effective Systems
All units employ high efficiency condensate
separators to ensure that the water is properly
separated from the air stream under all operating
conditions. In addition, no air loss drains (TMS38
and above) remove the condensate reliably without
wasting any power.
• Instrumentation That You Can Read
Essential information such as pressure and
dewpoint are displayed (TMS55 and above) on
easily read panels that can be interpreted
immediately without having |
|
