Ingersoll-Rand Rail System- Load Trolleys

Peter Hold Ltd - Industrial Air Solutions, hoists, tools, compressores and accessories


	Aluminium Rails Curved Rails Load Trolleys End Trucks Hanger Kits End stops and spline kits Air & electricity supply systems Complete Rail system sets Back to product range overview

Load Trolleys for Aluminium Rail Profiles Ingersoll Rand

	Trolley	ZRAT	ZRA1	ZRA2	ZRS2	ZRS3

Simple Trolley Part-No.		227 kg 31057	227 kg 30281	454 kg 30172	454 kg 30821	454 kg 30821
Load trolley (with suspension axle) Part-No.		-	227 kg 30304	454 kg 30923	454 kg 30842	454 kg 30842
Hoist trolley Part-No.		227 kg 313313	227 kg 30313	454 kg 30314	454 kg 30315	454 kg 30315
Dual Hoist trolley Part-No.		-	454 kg 30303	908 kg 30906	908 kg 30830	908 kg 30830
3 Hole Trolley Part-No.		227 kg 31056	227 kg 30279	454 kg 30015	454 kg 30510	454 kg 30510
Reaction Trolley (for cantilevered loads) Part-No.		-	-	454 kg 30016	454 kg 30511	-
Bumper Trolley Part-No.. XXXX -1200 = L=305mm -2400 = L=610mm -3600 = L=915mm -4800 = L=1220mm		-	30307-1200 30307-2400 30307-3600 30307-4800	30148-1200 30148-2400 30148-3600 30148-4800	30148-1200 30148-2400 30148-3600 30148-4800	30148-1200 30148-2400 30148-3600 30148-4800

Photo	Radius	Angle	Part-No.
	914 mm	15°	30254
		30°	30255
		45°	30256
		60°	30257
		90°	30258
Note:	The ZRA1 monorails use the same components as the ZRA1 bridge cranes (hanger kits, load trolleys, etc), except dual hoist trolley, ref. 30303.

back to top

Rail System

Typical installation

WARNING: To correctly calculate the load capacity of each component described in the next pages, please apply the following rule of calculation: A+B+(C:2). A = Load to be moved, B = Balancer or hoist weight, C = Weight of the lower rails and trolleys divided by 2.

website design & development by emazing international :: last update 28.8.10