|
CONVENIENT TOP EXHAUST
The cooling air flow discharges from the top of the
package facilitating easy ducting for removal and/or
recovery of exhaust heat.
46°C AMBIENT
SSR compressors operate in high ambient conditions, making
them suitable for locations around the world. Even if the
compressor is not operated in sweltering climates, the high
temperature rating ensures fewer nuisanceshutdowns caused
by fouled coolers.
QUIET ENCLOSURE
A low sound enclosure is standard and keeps sound levels to
a minimum.
END-TO-END COOLING
The aftercooler is located at the inlet end of the
package. This allows cool compressed air as low as
8°C above the ambient temperature to pass
downstream to the air system.
STAR-DELTA STARTER
This advanced starter gives the compressor a controlled, cushioned
start, eliminating current
surges and extending component life for increased system reliability.
EASY SERVICEABILITY
The SSR package is remarkably uncluttered, making
servicing easy. All components are readily accessible behind
easily removable panels.
ENERGY EFFICIENT AIREND
If you’re looking for the greatest efficiency possible
from a rotary screw then look no further than
Ingersoll-Rand two-stage compressors. The heart of
the compressor is our time-proven two-stage airend.
By compressing the air in two stages instead of one,
energy savings of up to 15% are realised.
The airend rotors are precision machined in a
twenty-step process, ensuring unsurpassed rotor
profile accuracy, repeatability, and efficiency.
|
RUGGED MOTOR
The extra toughness built into the SSR electric motor means
it will run when other motors do not.
Maintenance and repair of the SSR motor are just like any
other electric motor.
EASY CONNECTIVITY
The SSR is fully piped and wired, resulting in simple external
connection of all utilities.
FACTORY-TESTED
Testing each and every compressor produced
ensures the highest reliability and lowest operating
cost compressor available.
8000 HOUR/2-YEAR LUBRICANT
Ultra Coolant™ reduces maintenance costs by lasting longer
between changes. Also, because of its superior separation
properties less coolant is passed downstream to the air system,
further minimising coolant replacement costs. Finally, Ultra
Coolant’s biodegradable properties eliminate the need
for an oil-water separator, thereby reducing
the problems associated with condensate disposal. (Subject
to local approval).
INHERENT LEAK-FREE DESIGN
Using O-ring fittings on all connections 1/2" and larger
significantly reduces the potential leakage problems
REDUCED BEARING LOADS
A lower compression ratio in each stage reduces
bearing loads and increases airend life. The use of
the highest quality bearings available assures years of
reliable, efficient service.
COOLANT CURTAIN
One of the keys to the efficiency of the two-stage
design is the coolant curtain. Significant cooling of
the air is achieved by injecting atomised oil into the
compressed air stream leaving the first stage.
Lowering the air temperature prior to entering the
second stage significantly decreases the energy
required for compression. The coolant curtain also
eliminates the need for an intercooler.
|
|
