|
|
- Extensive range of hydraulic pumps for a vast variety
of applications
- Suitable for all hydraulic torque tools and bolt
tensioning cylinders
- Special models available with pneumatic or air motor
drive unit
- Special models available for site work - compact,
lightweight and easy to operate
|
|
Manual hydraulic pumps 700 bar - 3'500 bar for hydraulic torque
wrenches and hydraulic bolt tensioning units
Complete with pressure regulating valve
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Voltage
|
Power
kW |
Pump capacity
l/min |
Oil capacity
l |
Dimensions
L x B x H
mm |
Stages |
Weight
kg |
|
HA1 * |
1'350 -
1'500 |
|
|
|
2.5 |
800x230x310 |
1 |
10.5 |
| HA2 |
1'000 |
|
|
|
2.5 |
800x230x310 |
1 |
10.5 |
| HA3 * |
1'350 -
1'500 |
|
|
|
2.0 |
780x305x160 |
2 |
10.2 |
| HA4 * |
2'500 |
|
|
|
2.0 |
780x305x180 |
3 |
10.6 |
| DA16 * |
1'500 |
|
|
|
2.5 |
835x140x270 |
2 |
9.0 |
| HA25 * |
1'350 -
3'000
|
|
|
Mini |
1.5 |
450x220x250 |
3 |
7.8 |
back to top
Compact - Compact-Aggregate
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Voltage
|
Power
kW |
Pump capacity
l/min |
Oil capacity
l |
Dimensions
L x B x H
mm |
Stages |
Weight
kg |
|
EHPC plus
|
EHPC*
plus |
700 |
110 -
253 |
2.0 |
10.5 -
0.6 |
7 |
330x250x450 |
2 |
26.0 |
| EHP |
700 |
230 |
2.0 |
10.5 -
0.6 |
7 |
330x250x530 |
2 |
27.0 |
* With brushless synchronised motor, suitable for
all international power networks from 100-253 V, 45-66
Hz.
|
Available with manual or automatic control, with
5m remote control.
No magnetic control valves: The direction switch of
the drive motor assures powerful
but careful changeover from power stroke to idle stroke.
"Gentle" operation guarantees long life
of the tools. Minimal heat production of hydraulic
oil due to CW-/CCW motor direction an overflow of
heat into the oil tank is nearly impossible
Suitable for continuous operation, low running costs.
Drive via maintenance-free and low in wear synchronized
motor, frequency controlled
and brush-free. Processor controlled motor regulation
speed-, pressure- and volume
dependent control, Perfectly adjusted oil flow, due
to 3-stage-operation
Environmentally friendly: low sound level.
|
 |
Manual control:
By pressing the button trigger the cylinder piston of
the connected hydraulic tool is extended. When loosening
the piston is being retracted. The motor automatic shuts
off after
2-3 seconds.
|
|
Automatic control:
The „Start“ function enables the working piston
to either extend or retract automatically, whereas 19
different time intervals correspond to 19 different
types of torque tools. Assignment of respective time
intervals to the corresponding tool can be adjusted
manually on the spot.
|
back to top
Electro hydraulic high pressure pumps ideal for bolt tensioning
cylinders and torque wrenches
type DKS or DRS with single hose systems - complete with
10m remote control assembly
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Voltage |
Remote control voltage
V
|
Dimensions
L x B x H mm |
Weight with Oil
kg |
 |
DA-8
|
1'000
|
230V |
24 |
550 |
290 |
280 |
23.0 |
| DA-8 |
1'000 |
3 x 380V/50Hz |
24 |
550 |
290 |
280 |
23.0 |
|
The electro hydraulic pump is powered by a motor placed
in an oil bath. The aluminium tank with cooling fins
allows a fast heat exchange. The big oil tank volume
of 3.5 l makes this unit ideal for continuous use. Complete
with standard remote control, strong protection cage
and a big 100mm dia. torque and pressure gauge. A proven
and reliable design.
Additional models for applications in highly combustible
areas with pneumatic or electric motors as well as various
handpumps are available upon request.
|
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Voltage |
Remote control voltage
V
|
Dimensions
L x B x H mm |
Weight with Oil
kg |
 |
UP-35RH-NO
|
700
|
230V/50Hz |
1.0 |
322 |
135 |
111 |
6.6 |
| The cost effective,
powerful alternative ideal for site work. Extremely leightweight,
shoulderstraps make transport easy and comfortable. Splash
water resistant - ideal for outdoor appliactions, very
easy to use. Complete with big pressure gauge, pressure
regulator HAWE and CEJN high pressure couplings. |
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Voltage |
Remote control voltage
V
|
Dimensions
L x B x H mm |
Weight with Oil
kg |
 |
EÖA4
|
1350
|
230V/50Hz |
|
|
|
|
|
| EÖA2 |
1500 |
230V/50Hz |
|
|
|
|
|
-
Hochdruckpumpen-Aggregat mit konstantem
Arbeitsdruck (APC-Steuerung)
-
Digitale Druckanzeige Manometer
in bar und psi Rippentank zur Temperaturreduzierung
-
Transport- und Schutzrahmen
-
Alle Bauteile gegen Korrosion geschützt
-
Ablassschraube
Speziell geeignet
für Spannzylinder
|
back to top
Hydraulic pumps with air or pneumatic pump motor
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Operating
Pressure
bar
|
Power
kW |
Pump capacity
l/min |
Oil Capacity
l |
Dimensions
L x B x H
mm |
Weight
kg |
LHP |
DA15 |
935 |
6 |
1.0 |
0.4-4.0 |
7 |
540x300x340 |
28.0 |
| DA9 |
935 |
6 |
1.0 |
0.7-8.5 |
5 |
360x240x290 |
31 |
| LHP |
700 |
6 |
1.0 |
0.4-4.0 |
7 |
330x250x420 |
26 |
| PA 1 |
1600 |
8 |
1.0 |
0.2-4.5 |
5 |
540x250x300 |
22 |
| PA 3 |
1600 |
8 |
1.0 |
0.3-6.0 |
5 |
570x320x420 |
25 |
| PA 5 |
2750 |
8 |
1.0 |
0.15-4.0 |
11 |
400x300x550 |
31.5 |
back to top
Hydraulic hose assemblies
| Photo |
Type /
Model-No.
|
Pressure
max. bar
|
Length
m
|
Weight
couplings
kg |
Weight hose/m
kg |
Comments |
BHDS |
34.00030 |
1350 |
1 - 8 |
0.8 |
0.3 |
Single hoses |
| 34.00031 |
1500 |
1 - 8 |
0.8 |
0.3 |
| BHDS 02 |
1000 |
0.2 |
|
|
order as a set of
two |
| BHDS 02 |
1000 |
2.0 |
|
|
| BHDS 5 |
1000 |
5.0 |
|
|
| BHDS 10 |
1000 |
10.0 |
|
|
| |
The hydraulic hose assembly is supplied complete
with couling and hose fitting. A wrong connection
can therefore be eliminated. A universal extension
with various lenghts of hoses is possible. Hydraulic
hose assemblies type BHDS need to be ordered in sets
of 2.
|
back to top |
|
